|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
Video ICs VCR audio signal processing system BH7779K The BH7779K is an audio signal processing system IC that includes a peak-noise reduction processor, an FM modulator / demodulator circuit, an input / output switcher, an automatic FM detector circuit, an FM band-pass filter, a normal-audio circuit and a regulator circuit. *Applications recorders VHS Video cassette *Features signal prosessing system IC that (Hi-Fi and 1) An audio normal audio) includes a peak-noise reduction (PNR) prosessor, an FM modulator / demodulator circuit, an input output switcher, an automatic FM detector circuit, an FM band-pass filter, a normalaudio circuit and a regulator circuit. 2) Operates off dual power supply which allows a large reduction in the number of coupling capacitors required. A built-in regulator makes it easy to construct a power supply system. 3) A built-in two-line serial control decoder circuit allows serial control of the internal mode settings. 4) Four-input switcher (turner, BS, and line 1 and 2). The output switcher switches between STEREO / LEFT / RIGHT and Hi-Fi / MIX / NORMAL, and a BS monitor function is provided. 5) The PNR processor and FM modulation / demodulation circuit povide reverse characteristics at recording and playback. Also, carrier frequency adjustment and FM de-emphasis / playback level adjustment have been combined. 6) Built-in FM band-pass filter connects directly to the playback amplifier and excels at attenuation of the other channel. The FM recording output circuit has a high-performance high-frequency cutoff filter that produces a sine wave output. 7) Switching noise is reduced by a slope-control type differential compensation circuit. 8) Built-in envelope detector circuit and noise-detecting automatic FM detector circuit. 9) Built-in normal-audio signal processing circuit that allows SP / LP / EP equalizer switching. Control terminal provided for use with the BA7755AF higi-voltage head switcher. 1 Video ICs BH7779K *Absolute maximum ratings (Ta=25C) Parameter Symbol VCC Applied voltage Limits 23, 55pin******************************6.0 59 pin******************************* - 6.0 6, 8, 9 pin*****************************6.5 Other than the pins above: 6.0V 800 Unit V V V V mW C C VEE VIN VIN Power dissipation Operating temperature Storage temperature Pd Topr Tstg - 10 ~ + 70 - 55 ~ + 125 When IC is stand alone, reduced by 8.0mW for each increase in Ta of 1C over 25C. When mounted on a 90mm x 50mm, t = 1.6mm glass epoxy board, Pd = 1.3W (reduced by - 13.0mW for each increase in Ta of 1C over 25C). *Recommended operating conditions (Ta = 25C) Parameter Power supply voltage Power supply voltage Symbol UNREG-VCC UNREG-VEE Range + 7.0 ~ + 7.0 ~ Unit V V The built-in regulator in this IC outputs + 5.0V from pin 55, and - 5.0V from pin 59. The power supply voltage given above is the voltage to be applied to UNREG VCC and UNREG VEE pins in the measurement circuit to obtain regulator output. Therefore, the upper limit of the power supply voltage is set by the externally connected transistor that forms the regulator circuit, and not by the IC itself. Note, also, that the lower limit will change depending on the value of the resistor connected between the collector and base of the transistor. 2 Video ICs BH7779K *Block diagram NA REC OUT NA HEAD IN NA PB OUT NA PB NFB NA PB IN HEAD EQ Hi-Fi R IN Hi-Fi R OUT Hi-Fi L OUT Hi-Fi L IN NR TC R 34 NA ALC PB EQ NA FB GNN WTNG R 33 48 47 46 45 44 43 EQ 42 41 40 39 38 37 36 35 REC EQ SW 49 NA REC NFB 50 MIX ALC 51 MIX OUT 52 LINE R OUT 53 LINE L OUT 54 VCC 55 ERP 56 GND 57 ERM 58 VEE 59 LINE1 R IN 60 LINE1 L IN 61 LINE2 R IN 62 LINE2 L IN 63 Vref 64 RECAMP REC EQ EQ PB ALC PNR AMP SW AII 32 NR EMPH R 31 DC FB R 30 VCO f0 adj R 29 GNMR 28 FM REC OUT 27 Hi-Fi DET AUDIO HEAD SWICTH PULSE IN MIX AMP LINE AMP LINE AMP MODEM OUTPUT SWITCH 26 RHS CTRL 25 FM ALC REG D.O. COM. FMBPF 24 BPF f0 adj 23 VCB 22 GNB DATA DECODER MODEM ENVE LOPE 21 FM PB IN 20 GNML 19 VCO f0 adj L INPUT SWITCH PNR 18 DC FB L 17 NR EMPH L 1 TUNER R IN 2 TUNER L IN 3 TUNER M IN 4 BS R IN 5 BS L IN 6 MUTE CTRL 7 GNDD 8 DATA 9 CLOCK 10 ENVE OUT 11 INSW R OUT 12 PNR R IN 13 INSW L OUT 14 PNR L IN 15 NR TC L 16 WTNG L 3 Video ICs BH7779K *Pin descriptions Pin function - 1 / 3 Pin No. 2, 1, 3 5, 4 6 7 8 9 10 13, 11 14, 12 15, 34 16, 33 17, 32 18, 31 19, 30 20, 29 21 22 Pin name Function TUNER input (L, R, and M). BS input (L and R). Line output mute control input. Serial control GND. Serial control data input. Serial control clock input. FM input Lch signal component envelope output. Input SW output. PNR audio input. PNR attack and recovery time setting. Attack R: 530, recovery R: 6.5k. Waiting characteristic high-frequency time constant setting. NR emphasis time constant setting. (external C = 0.01F, R = 18k, 5.6k) PNR operating reference potential. VCO control current setting terminal. PNR and MODEM GND. Both L and R unconnected. Playback FM input. 660mVP-P Typ. No input coupling capacitor (GND to VCC). FM BPF GND. Pin voltage I / O circuit TUNER IN L, R, M BS IN L, R MUTE CTRL GNDD DATA IN CLOCK IN ENVE OUT INPUTSWOUT L, R PNR IN L, R NR TC L, R WTNG L, G NR EMPH L, R DC FB L, R VCO f0 ADJ L, R GND (GNM) L, R FM PB IN GND (GNB) 0.0V 0.0V -- -- -- -- EE: 0.8V PB: 1.0V 0.0V 0.0V - 5.0V 0.0V 0.0V 0.0V 2.5V 0.0V 0.0V 0.0V 32.7k 93.5k 3k (more 2.5V) -- B (PNP) B (PNP) EE: 50k PB: EF (NPN) EF: (P - P) 50k -- -- -- 11.5k EF(NPN) -- 33k -- I / O circuit; EF: emitter follower, P-P: push pull, B: base, and C: collector. All numerical values are standardized values. 4 Video ICs Pin function - 2 / 3 Pin No. 23 24 25 26 27 28 37, 35 38, 36 39 40 41 42 43 44 45 Pin name Function MODEM and BPF VCC. BPF center frequency adjustment. FM ALC time constant setting. High-voltage head switch control (BA7755). Audio head switching pulse input. EE: recording FM output. Sine wave output. PB: BPF output monitor. PNR audio output. Hi - Fi input for output switcher. Normal line amplifier feedback. Normal line amplifier ALC time constant setting. Attack and recovery time setting. Normal line amplifier playback input. Normal PB amplifier output. Normal PB amplifier equalizer switch. Normal PB amplifier feedback. Normal audio GND. Pin voltage BH7779K I / O circuit VCB BPF f0 ADJ FM ALC REC HSW CTRL AHSWP IN FM REC OUT Hi-Fi OUT L, R Hi-Fi IN L, R NA FB NA ALC NA PB IN NA PB OUT PB EQ NA PB NFB GNN 5.0V 1.9V 0.0V -- -- EE: 3.3V PB: 3.3V 0.0V 0.0V 0.0V 0.0V 0.0V 0.0V 0.0V 0.0V 0.0V -- EF (NPN) ~ 200 EF (NPN) ~ 2.5k C (NPN) B (PNP) EF (NPN) ~ 200 EF: (P - P) 47k 800 EF (NPN) ~ 500 100k EF (P - P) ~ 50 OPEN / 22 B (NPN) -- I / O circuit; EF: emitter follower, P-P: push pull, B: base, and C: collector. All numerical values are standardized values. Pin function - 3 / 3 Pin No. 46 47 48 49 50 51 52 54, 53 55 56 57 58 59 61, 60 63, 62 64 Pin name Function Normal audio playback input. Head resonance equalizer switch. Normal REC amplifier output. Recording equalizer switch. Normal REC amplifier feedback. ALC time constant setting for mixer amplifier Attack and recovery time setting. Mixer amplifier output for RF converter. Line output VCC regulator. VCC regulator error output. Input / output switch GND. VEE regulator error output. VEE regulator. LINE 1 input (L and R). LINE 2 input (L and R). VCC / 2 reference voltage. With power on detect and precharge function. Pin voltage I / O circuit NA HEAD IN HEAD EQ NA REC OUT REC EQ NA REC FB MIX ALC MIX OUT LINE OUT L, R VCC ERP GND ERM VEE LINE1 IN L, R LINE2 IN L, R VREFP 0.0V 0.0V 0.0V 0.0V 0.0V - 5.0V REC: B (NPN) REC: EF (PNP) 300k / 28 EF: (P - P) 100k / 22 B (NPN) EF (NPN) ~ 500 EF (NPN) 330 -- 0.0V 0.0V 5.0V 5.0V 0.0V - 5.0V - 5.0V C (NPN) -- C (PNP) -- 0.0V 0.0V 2.5V 93.5k 93.5k 10k I / O circuit; EF: emitter follower, P-P: push pull, B: base, and C: collector. All numerical values are standardized values. 5 Video ICs BH7779K *Input / Output circuits control and input / output circuits - (1) Equivalent circuits for the TUNER L, R, M (2, 1 ,3pin) LINE1 L / R, LINE2 L / R, BS L / R (61, 60, 63, 62, 5, 4pin) VCC - 2.0V VCC - 2.0V 2 (1 ,3pin) 22.7k 61 10k 2.0V (60, 63, 62, 5, 4pin) 63.5k 30k 2.0V VEE GND VEE GND LINE OUT L, R (54, 53pin) MIX OUT (52pin) VCC 50 200 52 20k 330 26k 8.5k 50 30k 200 VCC 54 (53pin) 5k 47k VEE VEE GND GND FM REC OUT (28pin) FM BP IN (21pin) VCC VCC 3.5V 200 200 50k 20p PB 5p 8k VEE GND 12.5k 100k 2k 28 21 VEE GND 6 Video ICs Equivalent circuits for the control and input / output circuits - (2) BH7779K NA PB IN (41pin) NA PB OUT (42pin) VCC 200 VCC 41 49.5k 40k PB EE 200 VEE GND 56 42 VEE NA PB NFB (44pin) ,NA HEAD IN (46pin) NA REC OUT (48pin) ,NA REC NFB (50pin) VCC 200 46 VCC 49k 44 50 100k VEE GND 50k 200 VEE GND 48 7 Video ICs Equivalent circuits for the control and input / output circuits - (3) AUDIO HEAD SWITCH PULSE IN (27pin) ENVELOPE / Hi - Fi DET OUT (10pin) BH7779K VCC PB 200 30k 5k 50k 30k 10 VCC 27 VEE GND VEE GND RHS CTRL (26pin) MUTE CTRL (6pin) 26 VCC 6 VCC 5k 51k 10k 3k 200 2.5V 16k 50k VEE GND 10k VEE GND DATA (8pin) , CLOCK (9pin) VCC (8pin) 9 10k 3V VEE 8 Video ICs BH7779K *Electrical characteristics the following measurement conditions apply: * Unless otherwise noted, UNREG - VCC = + 10V UNREG - VEE = - 10V Ta = 25C With regard to the control voltages, refer to the mode holding voltage range given in p. 185. * Output switch control (W1D2, W1D3 and W1D4) * BS through control (W3D7) * LINE AMP gain (W2D1 and W2D2) * FM output control (W4D1) * FM OUT switch control (W4D2, W4D3 and W4D4) * NTSC / PAL control (W2D6) * Recording mute (W1D6) * SP / EP control (W1D7) * FM detector level control (W2D3, W2D4) * ENVE characteristic control (W2D5) * FM TEST control (W4D5) * FM ALC control (W4D6) * MUTE CTRL (pin 6) Signal frequency f = 1kHz MODEM carrier frequency NTSC Lch 1.30MHz MODEM carrier frequency NTSC Rch 1.70MHz MODEM carrier frequency PAL Lch 1.4MHz MODEM carrier frequency PAL Rch 1.8MHz : STEREO : OFF : Standard ( + 10.3dB) : FM output on : FM REC output MIX ration ( - 13.5dB) : NTSC : recording MUTE : SP : standard : FNORM detector, no ENVE output : OFF : ALC ON : L (MUTE) 1 B.W. = 0.4 to 30kHz 2 DIN AUDIO Refer to Fig. 1 for the measurement circuit. Parameter REGULATOR Quiescent current (positive supply) EE Quiescent current (positive supply) PB Quiescent current (negative supply) EE Quiescent current (negative supply) PB Regulator input voltage ( + ) Regulator input voltage ( - ) Symbol Min. Typ. Max. Unit Conditions Iqp EE Iqp PB IqM EE IqM PB VCC VEE 26.0 36.4 34.7 48.6 46.3 64.8 mA mA mA mA V V EE mode, no input, standard carrier adjustment resistor. PB mode, no input, FNORM, BPE, standard carrier adjustment resistor. EE mode, no input, standard carrier adjustment resistor. PB mode, no input, FNORM, BPE, standard carrier adjustment resistor. - 20.1 - 15.1 - 11.3 - 21.6 - 16.2 - 12.1 4.69 5.04 5.39 -- -- - 5.37 - 5.02 - 4.67 9 Video ICs Parameter MANUAL MODE Line output level Channel balance (L / R) Distortion Maximum output level Output residual noise Crosstalk Muting level Switching DC offset BH7779K Symbol Min. Typ. Max. Unit Conditions Hi-Fi EE THROUGH (INPUT: TU IN L / R, LINE1 IN L / R, LINE2 IN L / R, BS IN L / R OUTPUT: LINE OUT L / R) VOEE CREE THDEE VOMEE VONEE CTEE MTEE VMODE - 11.0 - 0.8 -- 8.3 -- -- -- -- - 9.8 0.0 0.017 10.7 - 94.0 - 93.0 - 105 8.0 - 8.6 0.8 0.10 -- - 85.0 - 78.0 - 95 30 dBV dB % dBV dBV dBV dBV mV VIN = - 9.7dBV VIN = - 9.7dBV VIN = - 9.7dBV,1 THD = 1%,1 Connect the pertinent input to GND.2 VIN = 0.0dBV for the non-relevant tarminal, relevant terminal shorted to GND.2 VIN = 0.0dBV,2 (LINE OUT) ST / L / R / N, MIX ON / OFF Mode switching operating point voltage difference. BS THROUGH (INPUT: BS IN L / R OUTPUT: LINE OUT L / R) Output level Distortion Output residual noise VOBS THDBS VONBS - 10.9 -- -- - 9.7 0.005 - 99.0 - 8.5 0.08 - 87.0 dBV % dBV VIN = - 9.7dBV VIN = - 9.7dBV,1 Connect BS IN to GND.2 LINE AMP (INPUT: Hi-Fi IN L / R OUTPUT: LINE OUT L / R) Line amplifier gain 1 VOLINE1 + 9.3 + 10.3 + 11.3 dB VIN = - 20.0dBV MIX AMP (INPUT: TU IN L / R, LINE1 IN L / R, LINE2 IN L / R, BS IN L / R OUTPUT: MIX OUT) Output level Distortion MIX ALC level VOMIX THDMIX VALCMIX - 11.7 -- - 4.9 - 9.7 0.08 - 2.9 - 7.7 0.50 - 0.9 dBV % dBV VIN = - 9.7dBV, simultaneous L & R input VIN = - 9.7dBV, simultaneous L & R input1 VIN = 0.0dBV, simultaneous L & R input NORMAL EE THROUGH (INPUT: TU IN M, TU IN L / R, LINE1 IN L / R, LINE2 IN L / R, BS IN L / R OUTPUT: LINE OUT L / R) Output voltage level Distortion Output residual noise ALC level 1 ALC distortion VOEE THDEEN VONEEN VALCN1 THDALCN - 11.3 - 10.1 -- -- - 8.5 -- 0.045 - 80.0 - 7.0 0.040 - 8.9 0.10 - 70.0 - 5.5 0.15 dBV % dBV dBV % VIN = - 9.7dBV VIN = - 9.7dBV,1 Rg = 1k,2 VIN = - 5.0dBV VIN = - 5.0dBV,1 NORMAL REC AMP (INPUT: TU IN M, TU IN L / R, LINE1 IN L / R, LINE2 IN L / R, BS IN L / R OUTPUT: NA REC OUT) Output voltage level Distortion Maximum output level Output level for EE VORECN - 11.4 - 10.2 THDRECN VOMRECN MTRECN -- 7.0 -- 0.067 9.3 - 99.0 - 9.0 0.20 -- - 70.0 dBV % dBV dBV VIN = - 9.7dBV VIN = - 9.7dBV,1 THD = 1%,1 , ALC OFF VIN = 0.0dBV,2 , EE MODE ALC OFF 10 Video ICs Parameter Symbol Min. Typ. Max. Unit Conditions BH7779K NORMAL PB AMP (INPUT: NA HEAD IN, OUTPUT: LINE OUT) Output voltage level Distortion Output residual noise Open loop gain (PB PRE AMP) VOPBN THDPBN VONPBN GVPBNOR - 11.9 - 10.1 -- -- 58.0 0.15 - 61.5 65.5 - 8.3 0.40 - 53.0 -- dB % dBV dB VIN = - 70dBV VIN = - 70dBV,1 Rg = 1k,2 VIN = - 70dBV OUTPUT: NA PB OUT EQ SWITCH REC EQ SW impedance PB EQ SW impedance HEAD EQ SW impedance REQ REC REQ PB REQ HEAD -- -- -- 22 25 29 40 50 50 A A SP MODE SP MODE EP MODE RHS CONTROL RHS control current RHS control leakage current IIN RHS IL RHS 98 -- 118 -- 140 1 -- -- PNR ENCODE MODE Compression characteristic Encode distortion Output residual noise CMP THDEND VONENC -- -- -- - 24.6 0.17 - 56.5 -- -- -- dB % dBV Input VIN = - 9.7dBV - 59.7dBV output level difference. VIN = - 9.7dBV,1 Connect the pertinent input to GND.2 PNR DECODE MODE Expansion characteristic Time constant setting resistance value EXP RDET -- 5.10 - 50.3 6.15 -- 7.20 dB k VIN = - 15.5dBV - 40.5dBV output level difference. Resistance value connected between pins 15 and 34 and VEE. (when VCCS and VEES applied) MODEM REC MODE (INPUT: TUNER IN L / R, LINE1 IN L / R, LINE2 IN L / R, BS IN L / R, OUTPUT: FM REC OUT L / R) Carrier setting resistance value Frequency deviation Maximum frequency deviation FM output level Lch Rch Lch Rch Lch ROL ROR DEVL DEVR DEVMax.L 12.5 9.5 46.2 46.6 125 125 325 335 -- -- -- -- 15.0 11.5 52.2 52.6 147 147 370 380 - 53.0 - 48.0 - 52.0 - 55.0 17.5 13.5 58.2 58.6 169 169 425 435 - 40.0 - 40.0 - 40.0 - 42.0 - 11.7 k No input k kHz kHz kHz kHz mVP-P mVP-P dB dB dB dB dB VIN = - 9.7dBV VIN = + 5.0dBV (f = 10kHz) FM OUT SW: FM L mode FM OUT SW: FM R mode 2nd stage harmonics and fundamental harmonics spectrum ratio Lch: FM L mode, Rch: FM R mode 3rd stage harmonics and fundamental harmonics spectrum ratio Lch: FM L mode, Rch: FM R mode 1.3MHz / 1.7MHz spectrum ratio. Rch DEVMax.R Lch Rch Lch Rch VOFML VOFMR f2L f2R f3L f3R fLR Carrier 2nd harmonic Carrier 3rd harmonic Lch Rch FM MIX ratio (FM MIX1 mode) - 15.7 - 13.7 11 Video ICs Parameter Symbol Min. Typ. Max. Unit Conditions BH7779K MODEM PB MODE (INPUT: FM PB IN, OUTPUT: LINE OUT L / R) Carrier setting resistance, after BPF f0 adjustment, VIN = 660mVP-P, 1.30MHz, 1.70MHz MIX IN Demodulation output level Lch Rch Lch Rch VODL VODR VODL2 VODR2 THDDL THDDR VODSWL VODSWR VONDL VONDR - 12.7 - 12.7 VODL - 9.6 VODR - 9.6 -- -- -- -- -- -- - 10.7 - 10.7 VODL - 7.4 VODR - 7.4 0.12 0.13 -- -- - 8.7 - 8.7 VODL - 5.2 VODR - 5.2 0.35 0.35 -- -- dBV dBV dBV dBV % % dBV dBV dBV dBV DEVL = 50.0kHz, f = 1kHz DEVR = 50.0kHz, f = 1kHz DEVL = 50.0kHz, f = 10kHz DEVR = 50.0kHz, f = 10kHz DEVL = 50.0kHz, f = 1kHz,1 DEVR = 50.0kHz, f = 1kHz,1 f = 10kHz, AUDIO H. SW. P = 30Hz, 5VP-P rectangular-waveform input. After 10kHz TRAP passes DEV. = 25.0kHz2 Unmodulated 2 Demodulation output level 2 Demodulation distortion Demodulation SW noise Demodulation noise level Lch Rch Lch Rch Lch Rch - 98.0 - 88.0 - 98.0 - 88.0 Recordingplayback total characteristics (EE***INPUT: LINE IN L / R, OUTPUT: LINE OUT L / R) (PB***INPUT: FM PB IN, OUTPUT: LINE OUT L / R) Lch VRPL - 1.2 0.0 + 1.2 dB EE mode: VIN = - 9.7dBV, R0 adjusted. PB mode: Input FM PB IN = 660mVP-P, f = 1.30MHz / 1.70MHz 1:1 MIX. Input DEV = DEVL,R (frequency deviation given above). EE / PB line out level difference. Line output recording / playback level difference Rch VRPR - 1.2 0.0 + 1.2 dB FM BPF (INPUT: FMPB IN, OUTPUT: BPF MONITOR L / R) BPF center frequency setting resistance value ROBPF 19.6 25.2 30.7 k NTSC f = 1.505MH, VIN = 200mVP-P When BPF L and R output levels same. LcH, RcH mix input signal level, 660mVP-P (RATIO 1:1) NTSC Lch 1.30MHz insertion loss 1.15MHz attenuation 1.45MHz attenuation 1.70MHz attenuation ATTNLC - 14.1 ATTNL 1.15 ATTNL 1.45 ATTNL 1.70 - 11.1 - 8.1 dB dB dB dB 1.30MHz + 1.70MHz When FM ALC is ON 1.15MHz + 1.70MHz 1.45MHz + 1.70MHz 1.30MHz + 1.70MHz ATTNLC ATTNLC ATTNLC - 5.3 - 2.3 - 9.8 ATTNLC ATTNLC ATTNLC - 8.1 - 5.0 - 2.5 -- -- ATTNLC 12 Video ICs Parameter NTSC Rch 1.70MHz insertion loss 1.55MHz attenuation 1.85MHz attenuation 1.30MHz attenuation BH7779K Symbol Min. Typ. Max. Unit Conditions ATTNRC - 15.3 ATTNR 1.55 ATTNR 1.85 ATTNR 1.30 - 12.3 - 9.3 dB dB dB dB 1.30MHz + 1.70MHz When FM ALC is ON 1.55MHz + 1.30MHz 1.85MHz + 1.30MHz 1.30MHz + 1.70MHz ATTNRC ATTNRC ATTNRC - 3.4 - 8.8 - 5.7 ATTNRC ATTNRC ATTNRC - 1.4 - 9.5 - 4.7 -- -- ATTNRC - 30.0 PAL Lch 1.40MHz insertion loss 1.80MHz attenuation ATTPLC - 12.9 ATTPL 1.80 -- - 9.9 -- - 6.9 ATTPLC - 30.0 dB dB 1.40MHz + 1.80MHz 1.40MHz + 1.80MHz PAL Rch 1.80MHz insertion loss 1.40MHz attenuation DO detect circuit DO detector level ATTPRC - 14.3 ATTPR 1.40 -- - 11.3 -- - 8.3 ATTPLC - 30.0 dB dB 1.40MHz + 1.80MHz 1.40MHz + 1.80MHz VDDO -- 83.0 -- dB Input level to give DO due to attenuation. FNORM to Hi-Fi return delay circuit FM PB IN (1.3MHz, 1.7MHz, 1:1 MIX) time from 660mVP-P input to ENVE OUT rise. Audio head pulse in: f = 30Hz, 5VP-P rectangular waveform. Return delay time FNDLY 110 125 140 ms Envelope detect circuit (INPUT: FM PB IN, OUTPUT: ENVE OUT) 0dB = 660mVP-P, 1.3MHz & 1.7MHz MIX input Envelope output level SP0 Envelope output level SP1 Envelope output level SP2 Envelope output level EP1 VENVSP0 VENVSP1 VENVSP2 VENVEP1 -- 2.08 3.70 1.96 0 2.58 3.95 2.46 100 3.08 4.20 2.96 mV V V V No signal, SP MODE VIN = 0dB, SP MODE VIN = + 10dB, SP MODE VIN = - 4dB, EP MODE Hold pulse circuit Audio head switch pulse threshold voltage Hold pulse width VTHHOLD HOLD 1.5 -- 2.9 7.77 3.9 -- V s Hysteresis (0.5V) -- Control system mode holding voltages CLOCK IN L mode holding voltage H mode holding voltage VH9L VH9H 0.0 2.5 -- -- 0.5 VCC V V -- -- DATA IN L mode holding voltage H mode holding voltage VH8L VH8H 0.0 2.5 -- -- 0.5 VCC V V -- -- MUTE CTRL MUTE holding voltage DC MUTE holding voltage VH6L VH6H 0.0 3.9 -- -- 1.0 VCC V V -- -- 13 Video ICs BH7779K *Measurement circuit 22 470 0.01 NA REC OUT REC EQ HEAD EQ NAMEADIN HEADEQ IN 470 500 1k 330k 6.8k 500 VEE 47 2.2M 3.3 3.3 10k 48 1.5k 1800p 12k EQ 49 5.6k 2.2k Hi-Fi IN L Hi-Fi IN R VEE 3.3 10k 10 38 37 36 35 34 33 4.7 0.022 1.1k 3.3 40 ALC 39 5600p 47 46 45 44 43 42 41 50 51 RECAMP REC EQ EQ PB 32 PNR 31 5.6k 18k 0.01 47 TRAP OUT MIX OUT TRAP FILTER LINE OUT R LINE OUT L VEE 47 AMP MIX AMP LINE AMP LINE AMP SW AII MODEM 30 29 10k 6.8k 0.01 FM REC OUT 52 1500p 1500p 53 54 22k 22k VCC V A 4.7k OUTPUT SWITCH Hi-Fi DET 28 AMSWP IN 27 26 25 D.O. COM. FMBPF 24 23 100 22 20k 15k 10k 0.022 A 10k 55 100 56 57 REG VCCS A VEES VEE LINE1 R IN LINE1 L IN LINE2 R IN LINE2 L IN 1k 1k 1k 1k 4.7k V 4.7k 58 59 100 60 61 DATA DECODER MODEM ENVE LOPE 21 50 20 19 10k 10k 47 FM PB IN 4.7k 62 4.7k 63 4.7k 33 64 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 INPUT SWITCH PNR 18 18k 17 5.6k 0.01 TUNER R IN TUNER L IN TUNER M IN BS R IN BS L IN 1k 1k 1k 4.7k 1k 4.7k 1k MUTE CTRL CLOCK DATA 4.7k ENVEOUT V 10 10k VEE 1.1k 0.022 4.7 Fig.1 14 Video ICs BH7779K *Application circuit example 4321 5678 BA7755 22 330 0.01 47 VEE 2.2M 3.3 3.3 3.3 36 35 4.7 10 0.022 10k 34 33 32 PNR 31 30 MODEM 29 28 Hi-Fi DET 27 26 0.022 25 D.O. COM. FMBPF 24 23 22 FM REC OUT AUDIO HEAD SWITCH PULSE IN 5.6k 0.01 1.1k 22k 48 12k 49 5.6k 50 2.2k 51 47 52 53 54 55 100 UNREG VCC 4.7k 56 57 UNREG VEE VEE 100 LINE1 R IN 4.7k LINE1 L IN 4.7k LINE2 R IN 4.7k LINE2 L IN 4.7k 64 33 1 TUNER R IN TUNER L IN TUNER M IN BS R IN 4.7k BS L IN MUTE CTRL 4.7k 2 3 4 63 62 INPUT SWITCH 61 60 4.7k 58 59 REG MIX AMP LINE AMP 330k 12k 8.2k BIAS OSC 5600p 1.5k 1800p 47 46 45 44 43 EQ 42 41 40 ALC 39 38 37 RECAMP REC EQ EQ PB 18k 47 P / R CTRL VEE MIX OUT LINE R OUT LINE L OUT VCC AMP SW AII 1500p 1500p LINE AMP OUTPUT SWITCH DATA DECODER MODEM ENVE LOPE 21 20 19 47 FM PB IN PNR 18 18k 17 5.6k 0.01 5 6 7 8 9 10 11 12 13 14 15 16 1.1k 0.022 4.7 ENVELOPE / Hi-Fi DET OUT CLOCK DATA 10 10k Fig.2 15 Video ICs BH7779K *Electrical characteristic curve -5 - 10 - 15 - 20 GAIN: GV (dB) - 25 - 30 - 35 - 40 - 45 - 50 - 55 0.75 0.90 1.05 1.20 1.35 1.50 1.65 1.80 1.95 2.10 2.25 FREQUENCY: f (MHz) Lch Rch Fig. 3 FM BPF frequency characteristics (NTSC) *External dimensions (Units: mm) 16.4 0.3 14.0 0.2 48 33 49 16.4 0.3 14.0 0.2 32 64 1 2.7 0.1 17 16 0.15 0.1 0.05 0.8 0.35 0.1 0.15 QFP-A64 16 0.5 |
Price & Availability of BH7779K |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |